UBIQUITI UniFi AC-HD Dual Radio Wi-Fi Access Point

UBIQUITI UniFi AC-HD Dual Radio Wi-Fi Access Point

270,000.00

UBIQUITI UniFi AC-HD Dual Radio Wi-Fi Access Point

Categories: ,

Out of stock

  • Description
  • Reviews (0)
  • Specification

Description

The UAP-AC-HD-US Wave 2 Enterprise Wi-Fi Access Point from Ubiquiti Networks is a scalable enterprise access point solution designed to be easily deployed and managed. It supports the 802.11ac Wave 2 Wi-Fi standard with speeds of up to 1733 Mbps in the 5 GHz radio band, and up to 800 Mbps in the 2.4 GHz radio band. The Wi-Fi system offers simultaneous dual-band operation with 4×4 MIMO technology for each band. Install the UAP-AC-HD-US access point inside or outdoors (covered) using the included wall or ceiling mount kits. Once installed, the dual PoE compliant Gigabit Ethernet ports make it easy to connect the AP to the network without the need for a standalone power source.

The Wi-Fi system includes UniFi Controller software that can be installed on a PC, Mac, or Linux machine within the network, and is easily accessible through a standard Web browser. Using the UniFi Controller software, an Enterprise Wi-Fi network can be quickly configured and administered, without any special training. Real-time status, automatic UAP device detection, map loading, and advanced security options are all seamlessly integrated in the system.

UniFi Controller

View Your RF Environment
Use the RF environment functionality of the UniFi AC HD AP to detect and troubleshoot nearby interference, analyze radio frequencies, choose optimal AP placement, and configure settings.
Power RF Performance
Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.
Detailed Analytics
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting.
Wireless Uplink
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.
Guest Portal/Hotspot Support
Easy customization and options for Guest Portals include authentication, Hotspot setup, and the ability to use your own external portal server. Use UniFi’s rate limiting for your Guest Portal/Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use.

All UniFi APs include Hotspot functionality:
• Built-in support for billing integration using major credit cards
• Built-in support for voucher-based authentication
• Built-in Hotspot Manager for voucher creation, guest management, and payment refund
• Full customization and branding of Hotspot portal pages

Multi-Site Management
A single UniFi Controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator read/write and read-only accounts.
WLAN Groups
The UniFi Controller can manage flexible configurations of large deployments. Create multiple WLAN groups and assign them to an AP’s radio. Each WLAN can be VLAN tagged. Dynamic VLAN tagging per Wi-Fi station (or RADIUS VLAN) is also supported.

802.11ac Technology

MU-MIMO
Assuming the same conditions, a Wave 2 AP provides up to 75% improvement overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4×4 Spatial Streams
At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
• four 1×1 clients
• two 2×2 clients
• one 2×2 client and two 1×1 clients
• one 3×3 client and one 1×1 client
A 4×4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3×3 in both radio bands.
Client Compatibility
The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi AC HD AP delivers up to 125% greater performance than a typical Wave 1 AP.

Hardware

Easy Mounting
Its sleek design seamlessly integrates into any environment (all accessories included) and is compatible with existing UAP-AC-PRO mounts.
LED
Unique LED provisioning ring provides administrator location tracking and alerts for each device.
Dual-Gigabit Ethernet
Unique LED provisioning ring provides administrator location tracking and alerts for each device.
Enhanced Processing Power
The UniFi AC HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.
Power over Ethernet (PoE)
Includes PoE functionality. Each single-pack includes a PoE adapter.
PoE Standard
The UniFi AC HD AP is compatible with an 802.3at PoE+ compliant switch.

Reviews

There are no reviews yet.


Be the first to review “UBIQUITI UniFi AC-HD Dual Radio Wi-Fi Access Point”

Ubiquiti Networks UAP-AC-HD-5-US Specs

Wireless
Wireless Frequency BandsNot Specified by Manufacturer
Number of Antennas4
WLAN Mode802.11ac
Antenna Gain3 to 4 dBi
Transmit Power6 to 25 dBm
Supported ProtocolsWMM
Interface
Ports2 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) PoE+
Management
Supported Clients500
Max SSIDs Supported4
Throughput2.4 GHz: 450 Mb/s
5 GHz: 1700 Mb/s
Hardware
Supported IEEE Standards802.3at
Electrical
Power Consumption17 W
Environmental
Operating Temperature14 to 158°F / -10 to 70°C
Operating Humidity5 to 95%
General
Dimensions8.7 x 8.7 x 1.9" / 22 x 22 x 4.8 cm
Weight1.8 lb / 0.8 kg
Packaging Info
Package Weight12.0 lb
Box Dimensions (LxWxH)11.5 x 10.1 x 9.9"