AirFibre 1Gbps+Blackhaul 5GHz

AirFibre 1Gbps+Blackhaul 5GHz

0 out of 5


AirFibre 1Gbps+Blackhaul 5GHz

Categories: ,
  • Description
  • Accessories
  • Specification
  • Download


he airFiber AF-3X 3 GHz Carrier Backhaul Radio from Ubiquiti Networks is designed for long-range, Point-to-Point (PtP) backhaul links. It features a high TDD throughput and Hybrid Division Duplexing (HDD) technology that helps the device achieve low latency. The airFiber 3X also allows users to customize backhaul links or upgrade existing PtP links.

The airFiber AF-3X operates using the 3 GHz frequency band and features a range of 656,168′ / 200,000m. Included with this device is a GPS antenna mount, an external GPS antenna, a metal strap, two cable ties, a 24V/1A airFiber PoE adapter with a mounting bracket, and a power cord.

Ubiquiti’s INVICTUS silicon and radio architecture are designed specifically for long-distance, outdoor wireless applications. Their INVICTUS core communications processing engine surpasses virtually all of the limitations inherent to generic Wi-Fi chips to help provide superior performance, long-range capability, DFS flexibility, and power output.
The 3 GHz frequency band offers interference-free operation, enabling the AF-3X to provide a high-reliability backhaul solution, although a license may be required in some regions.
Operation in Unlicensed Bands
Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations virtually anywhere within the radio band to avoid local interference, and the channel centers are selectable in 1 MHz increments. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements
Low Latency with HDD Technology
The airFiber X is designed to provide the highest TDD throughput and lowest latency available using proprietary Hybrid Division Duplexing (HDD) technology.
With tower space at a premium, the importance of being able to co-locate equipment is becoming an essential attribute for modern wireless networks. The airFiber X is engineered to permit multiple radios to operate side by side, allowing maximum spectral efficiency.
GPS Synchronization
Precise GPS frame synchronization enables co-located airFiber X radios to transmit and receive data without interfering with each other, enabling better frequency reuse and increased network stability.
Clean Power Output
Using advanced digital signal processing, the innovative airFiber X radio design has an ultra -clean transmitter output, reducing broadband noise, facilitating co-location, and enabling higher-order modulations like 256QAM for greater throughput.

No Accessories

Ubiquiti Networks AF-3X-US Specs

RF Connectors2 x RP-SMA Weatherproof (CH0, CH1)
1 x SMA Weatherproof (GPS)
GPS AntennaExternal, Magnetic Base
Power Supply24 V, 1 A PoE Gigabit Adapter (included)
Power MethodPassive Power over Ethernet
MountingairFiber X Mount (Rocket Mount compatible)
GPS Pole Mount (included)
CertificationsDFS Certified FCC Part 15.407 CE EN 302502 v1.2.1, EN 301 893 v1.7.1
Networking Interfaces
Data Port1 x 10/100/1000 Ethernet Port
Management Port1 x 10/100 Ethernet Port
Maximum Throughput525 Mbps
Maximum Range656,168' / 200,000 m
Encryption128-bit AES
Operating SystemairOS F
Wireless ModesMaster/Slave
Radio Frequencies
Operating Frequency3300-3900 MHz
(Dependent on regulatory region)
PowerMax. Conducted TX Power: 29 dBm
(Dependent on regulatory region)
Frequency Accuracy± 2.5 ppm without GPS synchronization
± 0.2 ppm with GPS synchronization
Channel Bandwidth10/20/30/40/50 MHz selectable
Programmable uplink and downlink duty cycles
Operating Temperature-40 to 131°F / -40 to 55°C
Dimensions & Weight
Dimensions8.82 x 3.32 x 1.89" / 224.03 x 84.33 x 48.01 mm
Weight0.77 lb / 0.35 kg

No download