CISCO IP Phone

CISCO IP Phone

0 out of 5

43,500.00 41,977.50

CISCO IP Phone

SKU: 4-16-1 Categories: ,

Out of stock

  • Accessories
  • Download
  • Specification

No Accessories

No download

Display5" / 12.7 cm
Display TypeGrayscale
Resolution800 x 480
Auxilliary I/O ConnectorYes
Ethernet ProtocolAn internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC.

The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic.

KeysLine keys
Soft keys
Back and release keys
Four-way navigation and select keys
Hold/Resume, Transfer, and Conference keys
Messaging, Application, and Directory keys
Standard keypad
Volume-control toggle key
Speakerphone, headset, and mute keys
StandThe display is easy-to-view and the buttons and keys are easy-to-use. The two-position foot stand supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with mounting holes located on the base of the phone.
Wall MountableYou can install the phone on a wall using an optional wall-mount kit (available separately)
Kensington Lock SupportYes
PoEIEEE Power over Ethernet class 2. The phone is compatible with both IEEE 802.3af and 802.3at switch blades and supports both Cisco Discovery Protocol and Link Layer Discovery Protocol - Power over Ethernet (LLDP-PoE)
Cisco IP Phone Power Cube 4This optional power cube is used as an AC-to-DC (48V) power supply for non-PoE deployments. Use of the power cube 4 also requires the use of one of the corresponding AC country cords
Call-Control SupportCisco Unified Communications Manager
- 8.5.1 (Non-secured mode Only)
- 8.6.2
- 9.1.2
- 10.0 and later

Cisco Unified Communications Manager Express (Unified CME)
- 8.6.2
- 9.1.2
- 10.0 and later

Cisco Hosted Collaboration Solution (HCS)
- 8.6.2 and later (using supported UCM versions above)

Audio CodecG.711a-law and mu-law, G.722, G.729a, Internet Low Bitrate Codec (iLBC), and Internet Speech Audio Codec (iSAC)
EHS FeaturesYou can control the hookswitch electronically with a third-party headset connected to an auxiliary port
QoSThe phone supports Cisco Discovery Protocol and 802.1Q/p standards, and can be configured with an 801.1Q VLAN header containing the VLAN ID overrides configured by the Admin VLAN ID
Operating Temperature32 to 104°F / 0 to 40°C
Non-Operating Temperature14 to 140°F / -10 to 60°C
Operating Humidity10 to 90% non-condensing
Non-Operating Humidity10 to 95% non-condensing