DINTEK Cat.6 Patch Cord 0.5m

DINTEK Cat.6 Patch Cord 0.5m

450.00 430.00

DINTEK PowerMAX Category 6 Patch Cords are specifically designed to support high speed data networks for 1000mb applications, and are fully tested to meet TIA/EIA Category 6 channel requirements.
The patch cables are made from high quality shielded four pair 24AWG stranded wire.
DINTEK PowerMAX Category 6 Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX UTP products be used in a end-to-end system to maximize cabling performance.

84 in stock

  • Reviews (0)
  • Specification

Reviews

There are no reviews yet.


Be the first to review “DINTEK Cat.6 Patch Cord 0.5m”

  • Category 6 Products exceed all TIA and ISO specifications for Category 5e/6 cabling systems and components
  • They have been Independently confirmed for system performance
  • Meets FCC parts 68
  • ANSI/TIA-568-C.2
  • ISO/IEC 11801
  • DINTEK Cat 6 products can be warranted for 25 years
  • Cat6 products are Interoperable with DINTEK and other standards compliant products
  • Independently been confirmed for Gigabit Ethernet applications
  • Having a single vendor solution ensures best system performance
  • Our products meet or exceed performance requirements for existing and proposed high-speed network applications including:
  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5) 
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps 1.2/2.4 Gbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video

Standards

  • UL Verified
  • ISO/IEC11801 2nd edition
  • ANSI/TIA-568-C.2
  • CENELEC EN 50173
  • LSZH Flame test as per IEC 60332-1

Features

  • Molded boots prevent pin from bending and cables from kinking
  • 24AWG stranded wire provides maximum flexibility
  • Brilliant colors make management a snap
  • Fully tested to meet ANSI/TIA-568-C.2 category 6 requirement
  • The various colors are available to meet TIA/EIA-606 standards
  • The mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.

Physical Characteristics

  • Twisted pair color code:
    - Pair 1> blue, white/blue ring.
    - Pair 2> orange, white/orange ring
    - Pair 3> green, white/green ring
    - Pair 4> brown, white/brown ring
  •  Conductor: 24AWG (7x0.195mm) stranded anneal copper wire
  • Insulation material: HDPE
  • Diameter of dielectric core: 1.0±0.05mm
  • Insulation thickness: min at any point: 0.20mm
  • Number of twist pairs: 4 pairs • Assembly: 4 pairs of dielectric core shall be stranded in circular form 
  • Material of jacket: PVC/LSZH 
  • Thickness of jacket: AVG 0.66~0.70mm 
  • Nominal O.D: 5.6±0.2mm 
  • Jacket color: red,orange,yellow,green,blue,grey, etc
  • RJ45 plug:Housing>polycarbonate
  • Contact>copper alloy 50u” gold plated over nickel
  • Strength>20lbs. min
  • Durability>200 cycles min.
  • Insulation resistance: 500 megaohms min. Molded boots prevent pin from bending and cables from kink.
  • Wiring schemes: T568B